Packaged Pump Houses

Apart from engineering and manufacturing packaged pump sets we are specialised in manufacturing turnkey packaged pump houses.

pre-fabricated SIMPLEX WideRange-HD packaged pump station acc. to NFPA 20 / FM – regulations

Backup Firepumpstation for Ring-main supply in a German oil-refinery

  • acc. to NFPA 20 firecode and FM-regulations
  • Diesel engine rating 735 kW / 1000 HP
  • Pump rating max. 1800 m³/h at 11 bar

 

Duplex Firepumpstation in special design for fire water supply from lake water with suction and discharge filter systems

  • Duplex Firepumpstation for waste-to-energy plant
  • 720 m³/h at 115 m head

  • Duplex Firepumpstation acc. to NFPA 20 FM/UL
  • 3000 US gpm at 120 m Head
  • special design ambient temp. up to -40°C
  • elevation 2.300 m A.S.L
  • shock-wave and earthquake resistant

 

pre-fabricated SIMPLEX WideRange-HD Generatorset Station acc. to DIN / VDE / VdS – Regulations

  • for operation of two external submersible firepumps with automatic power transfer switch and
  • emergency power supply to authorized consumers

The following styles are possible:

Packaged Pump Station housed within a module of steel construction (insulated or not insulated)


Packaged pump station with sound and heat insulation for outdoor installation, made of galvanized sectional steel parts with an additional, weather-resistant 2-pack external coating and internal roof drainage.

Equipment and design acc. to NFPA-20 (2003) with FM approved components. Electrical equipment with mains-operated and network-independent room ventilation system, heating and lighting. Tailor made pump station completely pre-piped and pre-wired as well as factory tested to be connected to the water and power supplies on site.

Packaged pump station with sound and heat insulation for outdoor installation, consisting of two separate modules each with one open side. The assembly will be carried out on site. Made of galvanized sectional steel parts with an additional, weather-resistant 2-pack external coating and internal roof drainage.

Equipment and design acc. to NFPA-20 (2003) with FM approved components. Electrical equipment with mains-operated and network-independent room ventilation system, heating and lighting. Tailor made pump station completely pre-piped and pre-wired as well as factory tested to be connected to the water and power supplies on site.

Shown is a packaged pump station, place of installation Siberia, with special insulation for temperatures up to -50°C.

Tailor made pump station completely pre-piped and pre-wired as well as factory tested to be simply connected to the water and power supplies on site.

Advantage: Ready for operation within very short time.

Further designs are available for the outer surfaces of the pumpstation, for example Aluminum with horizontal wave

Packaged Pump Station housed in a prefabricated Building made of Vacuum Concrete


Most of the main components will be prefabricated for installation by our field service on site.

Advantage: The packaged pump station can be easily integrated into the existing building structure on site.

Complete Manufacturing and Prefabrication of all the Equipment for Installation into an existing Pump House on Site


The installation can be carried out by the customer or by our field service. Complete supply of the material required for a pump house, including the main components, the piping, the smallest screw or the lighting – all will be thought of. The installation takes place by means of detailed assembly drawings provided by us.

Advantage: An existing building can be used.

Example 1
Pump station designed according to NFPA-20 standard with two vertical fire pump units with diesel engine drive

Example 2
Pump station designed according to NFPA-20 standard with two vertical fire pump units, one diesel engine driven, the other electric motor driven

Example 3
Pump station designed according to VdS standard with two fire pump units, one diesel engine driven, the other electric motor driven

 

FIRECONT – pre-fabricated Pumpstation Series HD , Type WB


VDS-approved and listed, with 2 Diesel-Engine driven Firepumpsets and Jockeypumpset
Sound-proof, heat-insulated, fully monitored with Monitoring-controller -Loop-wiring technology.
Suction piping with change-over for 2 suction tanks for each pumpset.
Pipe-heating system for external pipes

fertigpumpstation1

fertigpumpstation2

fertigpumpstation3

 

IMG_9378_79_80_81_82_83_tonemapped_Größe ändern

Roof Drainage
Grounding Connection

IMG_9390_1_2_3_4_5_tonemapped-1_Größe ändern

Pipe-wall ducts
Cable glands for pipe heating system

IMG_9409_tonemapped-1_Größe ändern

Fire-Brigade Connection

IMG_9321_2_3_4_5_6_tonemapped-1_Größe ändern

IMG_9341_2_3_4_5_6_tonemapped-1_Größe ändern

IMG_9297_298_299_300_301_302_tonemapped-1_Größe ändern Air-intake Louvers

Panel for pipe heating system
acc. to VDS

IMG_9309_10_11_12_13_14_tonemapped-1_Größe ändern Monitoring Controller

Duplex mains power  feed-in

Room heating units

Floor with PU-System Surface
and floor-Drain System